Mipa Bumper Paint Grey, Dark Grey, Black  1 literProduct FeaturesMipa Bumper Paint is a 1K structural coating for repairs to bumpers, moldings, exterior mirrors, etc. for plastic substrates commonly used in vehicle construction. Direct adhesion to cleaned and sanded plastic vehicle parts made of ABS, ABS - PC, PP - EPDM, PUR - RIM, PUR, PVC hard. Fast drying and easy processability as well as good weather resistance characterize this product. Temperature resistant up to 70 ° C.Notes:Processing conditions: From + 10 ° C and up to 80% relative humidity.Substrate preparation: Thoroughly clean plastic with Mipa Plastic Cleaner anti-static or Mipa Silicone Remover, then sand with a fine abrasive fleece (eg MP Soft Pad Superfine), degrease again with Mipa Antistatic Plastic Cleaner or Mipa Silikon Remover. Adhesion-impairing release agents must be removed without residue.Storage: Stored in sealed original container for at least 3 years.Hazard Statements:(H226) Flammable liquid and vapor (H336) May cause drowsiness or dizziness. (H412) Harmful to aquatic life with long lasting effects. (EUH066) Repeated exposure may cause skin dryness or cracking.Icon:danger!Safety:(P210) Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition. Do not smoke. (P241) Use explosion-proof electrical equipment / ventilation systems / lighting. (P261) Avoid breathing dust / fume / gas / mist / vapors / spray. (P303) If on skin (or hair): (P361) Take off immediately all contaminated clothing. (P353) Wash skin with water / shower. (P405) Keep locked up. (P501a) Dispose of contents / container in accordance with local / regional / national / international regulations.