DeVilbiss FLG-G5 1.4mm Paint Spray Gun with Air Filter/Regulator/Cleaning KitModel No. FLG-G5-14DeVilbiss FLG-5 1.4mm Gravity Fed Paint Spray Gun Air Inlet Tread: 1/4" | Plated Brass Air Cap | Stainless Steel Fluid Tip | 560 mls Cup + Air Filter/Regulator/Cleaning KitDeVilbiss FLG-5 1.4mm is a general purpose compliant spray gun for a wide range of refinish paints and coatings. Gravity, suction or pressureAir Inlet Tread: 1/4" Universal | Weight (gun & cup): Gravity 642 gms, Suction 934 gms | Air Cap & Ring: Plated Brass | Fluid Tip: Stainless Steel | Needle: Stainless Steel | Cup capacity: Gravity560 mls, Suction 1140 mlsMini air filter and water trap for use with gravity feed spray guns. Water can be drained from the trap by a non return valve at the bottom. Trap has a standard 1/4BSP male and female thread allowing it to fit easily onto any spray gun or air tool and then onto the compressed air hose. Size 90mm. Max air pressure 140PSIA light weight durable air regulator: Material: metal | Thread: 1/4" BSP Threads (13mm) | Reads in PSi and Bar | Glass lens not effected by solvents.Professional Cleaning kit with the following items included: Small, medium and large twisted pattern brushes for interior gun cleaning. A large, soft bristle dust and dirt removing brush. A hard bristle scrubbing brush for the exterior and internal gun parts. Tools for removing dirt and debris from inside the gun tips and interior. A roll of PTFE thread sealing tapeDetailed DescriptionDeVilbiss FLG-5 1.4mm Gravity Fed Paint Spray Gun Air Inlet Tread: 1/4"" | Plated Brass Air Cap | Stainless Steel Fluid Tip | 560 mls Cup + Air Filter/Regulator/Cleaning KitWhat you will receive:FLG-G5-14 DeVilbiss FLG-5 1.4mm Paint Air Spray GunSGC13 13 Piece Gun Cleaning KitWater Trap FilterAdjustable Air RegulatorGeneral purpose compliant spray gun for a wide range of refinish paints and coatings. Operates with unique and efficient DeVilbiss Trans-Tech Atomisation Technology ergonomically shaped gun handle for positive grip and comfort. Smooth action trigger with exceptionally light pull for fatigue free operation and ultra lightweight but strong, cast aluminium gun body. Full controls of pattern shape, fluid flow rate and air inlet pressure and precision engineered brass air cap and stainless steel fluid tips.NOT SUITABLE FOR USE WITH WATERBORNE MATERIALSKey features and benefits:Trans-Tech atomisation for paint saving efficiencyUltra lightweight, strong, cast aluminium gun body600cc paint cup capacity.Precision engineered brass air cap and stainless steel fluid tips and needles for long service lifeTechnical:Air Inlet Tread: 1/4" UniversalWeight (gun & cup): Gravity 642 gms, Suction 934 gmsAir Cap & Ring: Plated BrassAir Consumption: 277 l/min (9.8 cfm)Max. Pressure: 2 bar (29 psi)Typical Fluid Flow: up to 300 mlFluid Tip: Stainless SteelNeedle: Stainless SteelCup capacity: Gravity 560 mlsMini air filter and water trapTrap has a standard 1/4BSP male and female threadSize 90mmMax air pressure 140PSIA light weight durable air regulatorThread: 1/4" BSP Threads (13mm)Reads in PSi and BarGlass lensProfessional Cleaning kit:Small, medium and large twisted brushesA large, soft bristle brushA hard bristle scrubbing brushTools for removing dirt and debris from inside the gun tips and interiorPTFE thread sealing tape