MIPA 1K UV CLEARCOAT 1LTRMIPA 1K UV-Füller Grey 1 LiterMIPA 1K UV-Füller is a high-quality, UV-drying filler for fast and economic refinishes, which can be sanded already after 5 minutes irradiation by a UV LED-Light or mercury vapour lamp. Alternatively, sanding is also possible after a 4-5 minutes exposure to direct sunlight. It is therefore possible to save significantly heating-related costs. In the same time, cycle times are reduced since the painting process is not interrupted by heating intervals. Further advantages of Mipa 1K-UV-Füller are as follow:Extremely fast drying 1K-Filler. Drying with all common UV-lamps as well as under sun light. Especially suited for small repair areas. Universal adhesion, ready to spray.One-component system, ready for use. This product can be used at once and does not produce waste as a result of potlife-related curing.Substrates do not need be heated, which protects especially plastic substrates from deforming and overheating. In addition, there is no need to observe a cooling phase prior to sanding.After curing, this filler provides a very hard surface with excellent sanding properties.Outstanding mechanical and chemical resistance of the filler surfaceMipa 1K-UV-Füller is perfectly suitable for partial car coatings and spot repairs. Very good adhesion on steel, iron, aluminium and galvanized substrates.Spreading rate: 7 - 8 m2/l (for 80 μm DFT)